Repairing Garage Door Bracket In Simple Steps

Repairing a garage door bracket only takes a few simple steps. If the problem is that the bracket loosens from its mounting, you move along the entire length and look for screws and bolts. Tighten them with a screwdriver or wrench to secure the bracket securely to the walls. If the brackets are securely attached to the walls, your next target would be the chips and dents that might prevent the garage doors from functioning smoothly.

Garage Door Hinge And Brackets

The repair could be done by pounding them by rubber boat or hammer. If the brackets are damaged, they must be replaced. If your garage door is operated with a screwdriver, the mounting bracket can hold the motor head, but most of it is the guard rail. Place the ladder near the bracket so you can inspect it properly.

If it is damaged, replace it. Set the other ladder under the damaged bracket. You have to rest it under the railing, so you may need to adjust its height using wood cuts. While the damaged bracket is held up by the other step ladder, remove it using the power outlet. Remove the bolts for the railing first before you loosen the bracket yourself. Set the bolts aside and lower the damaged bracket.

12 Repairing Garage Door Bracket In Simple Steps Photos