Garage door panels – Through the years, door panels can get a bad look or they can only be damaged and must be replaced. When you want to do this you have to do some research on the model and the manufacturer, be sure to install the right panel. Then, how to replace it? First, finding replacement panels. Contact the computer manufacturer garage door can be a challenge if the door is older. Look for the brand manufacturer’s sticker on the door or contact the contractor who built your home for information.
When you find the garage door manufacturer you have to order the number of panels and style / color of the garage door panel you need. Most manufacturers will try to make you order a new door because they say the color of the other panels will fade and the garage door rail may be damaged. Only you can decide if you want a completely new garage door or not. Second, removing old panels. Garage doors panels are installed by sliding each panel into the garage door rail as well as being bolted.
And sometimes the spring side bolt fast-connected to the garage rail and then connecting each panel along with a hinge on each side. Unscrew the hinge from each side of the panels you need to remove. Unscrew and remove each panel from the top of the garage door until you have the damaged panels you want to be replaced from the garage door rail. Third, install new garage door refacing panels. Slide into the new garage door panel at the top of the garage door slot and bolt in the garage door rail once in place. Replace the old panels and bolt them in place. Reconnect two hinges between each garage door panel.
12 Replace Garage Door Panels Photos