To Replace The Garage Door Wheels

Garage door wheels – The old metal garage door wheels attached to the garage door can become noisy as they age and can chirp along the track. A garage door runs on tracks and has rollers to guide while in use. Occasionally these rollers wear out and need to be replaced. Wheel installation kits are affordable and available at any hardware store and can be installed in about an hour.

Garage Door Hardware Kit

Then, how about garage door replacement parts? Let’s starting with position the 2-by-4 so that the garage door is supported when the old wheel is removed on the stand. Make sure the 2-by-4 is the same height as the garage door. After that, remove the bracket by loosening the nuts or screws that secure it to the door. Use the drill to facilitate its extraction. Remove the bracket and any part with it to allow the new installation. Next, place the new bracket where it will be in the door. Place the stand so that you use as many of the existing holes as possible.

If necessary, drill the necessary holes with the electric drill. Hammer the new wheel garage door parts into the holder by its upright. Some brackets slide easier and a hammer may not be necessary. Do not tighten the nut downwards so that the correct positioning on the track can be established. Insert the disc into the track and place the bracket to insert it into the holes already established in the garage door. Tighten the nuts or bolts that hold the door bracket. Remove the 2-by-4 support and allow the door to lock under its own weight. Open and close the garage door to ensure a smooth ride and tighten the nut that holds the wheel bolt.

12 To Replace The Garage Door Wheels Photos